Bukobot 3D Printer Forum

News: Added the Bukobot Parts List (BOM) to Wiki at http://bukobot.com/bukobot-parts-list
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Has anyone replaced the extruders on their Bukobot?  (Read 595 times)


  • Newbie
  • *
  • Posts: 3
    • View Profile
Has anyone replaced the extruders on their Bukobot?
« on: January 10, 2017, 12:17:41 AM »
I'm frustrated with my machine and I don't like the way the filament is fed into the extruders, so I am looking to swap mine out.

Looking for any recommendation if you've done this.



  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Has anyone replaced the extruders on their Bukobot?
« Reply #1 on: June 17, 2017, 03:35:04 PM »

It's been a few months since your post, did you ever move forward on your upgrade?

I'm also frustrated with my machine.  I seem to be spending more time calibrating instead of printing.  I've been considering doing a full upgrade/mod  (hot end, extruder, build platform, auto bed leveling). But by that point it's almost an entirely new machine.  Maybe I should just start from scratch.  In either case, this looks like an awesome extruder with the E3D hot end: https://www.matterhackers.com/store/printer-accessories/e3d-titan-aero-extruder-12v-300mm

The configuration looks like a good match for our x-carriage (horizontal rather than a vertical Prusa-type platform). 



BloQcs design by Bloc
SMF 2.0.3 | SMF © 2011, Simple Machines