Bukobot 3D Printer Forum

News: Added the Bukobot Parts List (BOM) to Wiki at http://bukobot.com/bukobot-parts-list
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Terrible Prints, Please Help  (Read 284 times)

JC_Unstoppable

  • Newbie
  • *
  • Posts: 17
    • View Profile
Terrible Prints, Please Help
« on: April 10, 2014, 12:55:02 AM »
I have a bukobot Duo from the kickstarter campaign.
I've never gotten it to print well.
The provided settings in the wiki have been tried and they do not give a great print.

I'm using:
Filament: Green ABS IC3D,
Temp: 230C
Bed: 110C

The surfaces are printing kind of unevenly (I've tightened up the X/Y "belts")
The corners are blobby like it is over extruding or dwelling on the corners for too long.

The extruded filament is measuring at .019" or .48mm.

My settings screenshot are attached.  Thank you!


« Last Edit: April 10, 2014, 01:06:57 AM by JC_Unstoppable »

JC_Unstoppable

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: Terrible Prints, Please Help
« Reply #1 on: April 10, 2014, 12:55:24 AM »
Last screenshot

JC_Unstoppable

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: Terrible Prints, Please Help
« Reply #2 on: April 11, 2014, 04:02:38 AM »
Withdrawn.

I tried the stock settings on the wiki with IC3D filament and got satisfactory results.

Goddam ultimaker filament :(

 

BloQcs design by Bloc
SMF 2.0.3 | SMF © 2011, Simple Machines