Bukobot 3D Printer Forum

News: Added the Bukobot Parts List (BOM) to Wiki at http://bukobot.com/bukobot-parts-list
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Looking for suggestions for print quality of this model  (Read 317 times)

AlexofCharmCity

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • Owner/Operator
Looking for suggestions for print quality of this model
« on: March 18, 2014, 05:11:38 PM »
I've been trying to print this for a month with almost zero positive results, any input at this point would be awesome. I've been rotating it to 260 to put it flat and tried to get support structures to fill but they always put horizontal support, which is useless. VERY frustrated running a vanilla 8 with red PLA from printbl

really at the end of my rope here need to have this done in a week.

https://www.dropbox.com/s/hv2v75ze1kc9fo0/sphinx.stl

won't let me post the file here hope the link works OK

Please help. :'(

whosawhatsis

  • Administrator
  • Hero Member
  • *****
  • Posts: 598
    • View Profile
    • Whosawhatsis on G+
Re: Looking for suggestions for print quality of this model
« Reply #1 on: March 19, 2014, 10:07:16 PM »
I don't understand what you mean by "get support structures to fill but they always put horizontal support". If you can explain the issue you're having better and/or post pictures or the failure you're getting, it will help us figure out what issue you're having.

 

BloQcs design by Bloc
SMF 2.0.3 | SMF © 2011, Simple Machines