Bukobot 3D Printer Forum

News: Added the Bukobot Parts List (BOM) to Wiki at http://bukobot.com/bukobot-parts-list
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: White twisted wires on bed  (Read 282 times)

Jeffster

  • Newbie
  • *
  • Posts: 5
    • View Profile
White twisted wires on bed
« on: January 25, 2014, 09:20:11 PM »
Okay, the white twisted 'mystery' wires on the bed connect to where?

jit

  • Global Moderator
  • Full Member
  • *****
  • Posts: 174
    • View Profile
Re: White twisted wires on bed
« Reply #1 on: January 25, 2014, 11:17:58 PM »
If you have the Azteeg X3, it's the E1 connector.  See the X1 docs if you have the X1.

For more details, go to the Wiki (http://bukobot.com/) and search for 'thermistor connectors'.
Bukobot Duo v1

whosawhatsis

  • Administrator
  • Hero Member
  • *****
  • Posts: 598
    • View Profile
    • Whosawhatsis on G+
Re: White twisted wires on bed
« Reply #2 on: January 26, 2014, 03:58:21 AM »
That's the platform thermistor. It connects to the second (middle) thermistor connector, which should be labeled TBED on the Azteeg X3. We are no longer using the X1 for any of our machines.

Jeffster

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: White twisted wires on bed
« Reply #3 on: January 26, 2014, 11:41:02 PM »
Thank you! Yep.... Was able pull the connector through and wrap it around the other way to connect it to the 'tbd' port. The way it was shipped it seemed intentional that the plastic connector was tucked in between the platform and wood bed and too big to pull out between the available space.

 

BloQcs design by Bloc
SMF 2.0.3 | SMF © 2011, Simple Machines