Bukobot 3D Printer Forum

News: Added the Bukobot Parts List (BOM) to Wiki at http://bukobot.com/bukobot-parts-list
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Uploading Firmware to New X1 Board  (Read 1534 times)

whosawhatsis

  • Administrator
  • Hero Member
  • *****
  • Posts: 598
    • View Profile
    • Whosawhatsis on G+
Re: Uploading Firmware to New X1 Board
« Reply #45 on: January 25, 2014, 01:39:02 AM »
You didn't need to manually plug in number. Marlin comes with a set of pin assignments for the brainwave, you just needed to tell it what board you were using (82).

Steps2light

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
Re: Uploading Firmware to New X1 Board
« Reply #46 on: January 31, 2014, 02:38:32 AM »
82 was what we used. It was not enough. We had to add Bukobot's print space and add the specs of the threads and syncromesh for the Z axis in the Marlin coding. It got better.

whosawhatsis

  • Administrator
  • Hero Member
  • *****
  • Posts: 598
    • View Profile
    • Whosawhatsis on G+
Re: Uploading Firmware to New X1 Board
« Reply #47 on: February 02, 2014, 12:47:25 AM »
You should have started with the version pre-configured of a bukobot, then changed the board number. That should be all that's needed.

 

BloQcs design by Bloc
SMF 2.0.3 | SMF © 2011, Simple Machines